LLD
Lead locking device
LLD
Lead locking device
When lead removal is the right choice for a patient, the Lead Locking Device (LLD) provides the flexibility and traction needed for safe lead removal. LLD combines the best of the original LLD family and enhanced tip design with ease-of-use features to provide a flexible traction solution for leads targeted for removal.
Enhanced tip design
Provides flexibility and traction
Deploys a braided mesh to lock securely along the entire lead lumen
Features
EZ sizing
LLD EZ and LLD E accommodate a wide range of leads with inner lumen diameters from 0.015” (0.38mm) to 0.023” (0.58mm).
EZ tracking
Flexible platinum iridium tip design and sleek profile facilitate tracking and passage through tightly curved leads and past some points of lead lumen damage.
EZ visibility
Permits longer and highly visible radiopaque marker to assist identification of both the LLD E and LLD EZ tip location under fluoroscopy.
Specifications
- Model number 518-062
- Locks along entire lead lumen
- Yes
- Proven ability to unlock and reposition
- Yes
- Average tensile strength**
- 19 lbs.
- Low-profile loop handles
- Yes
- Locking range (diameter)
- 0.015”/0.38mm to 0.023”/0.58mm
- Working length
- 65 cm
- Packaged with clearing stylet
- Yes – 0.012”/0.30mm diameter
- Model number 518-039
- Locks along entire lead lumen
- Yes
- Proven ability to unlock and reposition
- Yes
- Average tensile strength**
- 19 lbs.
- Low-profile loop handles
- No
- Locking range (diameter)
- 0.015”/0.38mm to 0.023”/0.58mm
- Working length
- 85 cm
- Packaged with clearing stylet
- Yes – 0.012”/0.30mm diameter
- Model number 518-018
- Locks along entire lead lumen
- Yes
- Proven ability to unlock and reposition
- Yes
- Average tensile strength**
- 12 lbs.
- Low-profile loop handles
- No
- Locking range (diameter)
- 0.013”/0.33mm to 0.016”/0.41mm
- Working length
- 65 cm
- Packaged with clearing stylet
- Yes – 0.012”/0.30mm diameter
- Model number 518-019
- Locks along entire lead lumen
- Yes
- Proven ability to unlock and reposition
- Yes
- Average tensile strength**
- 24 lbs.
- Low-profile loop handles
- No
- Locking range (diameter)
- 0.017”/0.43mm to 0.026”/0.66mm
- Working length
- 65 cm
- Packaged with clearing stylet
- Yes – 0.015”/0.38mm diameter
- Model number 518-020
- Locks along entire lead lumen
- Yes
- Proven ability to unlock and reposition
- Yes
- Average tensile strength**
- 45 lbs.
- Low-profile loop handles
- No
- Locking range (diameter)
- 0.027”/0.69mm to 0.032”/0.81mm
- Working length
- 65 cm
- Packaged with clearing stylet
- Yes – 0.015”/0.38mm diameter
- Accessory kit
- Model number
- 518-027
- Lead cutter
- Model number
- 518-024
Documentation
Related products
Disclaimer
Liberator is a registered trademark of Cook Medical. Cook Products for Lead Extraction brochure accessed 8-19-2024, from https://www.cookmedical.com/products/vas_lr0fa_webds/ and Liberator Instructions for Use on file.
** Minimum specification for LLD EZ, LLD E, LLD #2, and LLD #3 is 10 lbs; minimum for LLD #1 is 7 lbs.
Product availability is subject to country regulatory clearance. Please contact your local sales representative to check the availability in your country.
LLD is distributed by LifeSystems in Australia and New Zealand.
Always read the label and follow the directions for use.
Philips medical devices should only be used by physicians and teams trained in interventional techniques, including training in the use of this device.
Philips reserves the right to change product specifications without prior notification.
©2025 Koniklijke Philips N.V. All rights reserved. Trademarks are the property of Koninklijke Philips N.V. or their respective owners.