PerfectCare Steam iron

2400 W, 45 g/min continuous steam, 185 g steam boost, SteamGlide Plus soleplate GC3929/64


Fabric sticks to my Philips Steam Iron’s soleplate

When fabric sticks to your Philips Steam Iron’s soleplate, find out here what you can do.

The temperature setting is too high for the fabric

Please check the label of your garment or read the instructions of your Philips iron to learn what temperature setting is advised.

The soleplate is damaged or scratched

In this case, we recommend that you contact us.

The soleplate temperature becomes too hot

If this happens, there might be an issue with your iron's heating function. We recommend that you contact us.

How to clean fabric that melted into the iron

To remove fabric or any dirt from your iron’s soleplate, you should use the Philips Cleaning Stick following these steps:

  1. If your iron has a dial, set the temperature dial setting on the soleplate to between "1 dot" and "2 dot" (If your iron does not have a dial, skip this step)

  2. Unplug the iron and let it rest on its heel with a piece of rag cotton cloth underneath

  3. Apply the cleaning stick over the stained area once or twice

  4. Wipe off the stain and liquid from the soleplate with the piece of rag cloth

  5. Clean off the remaining wax in the steam vents with a cotton bud and by steam ironing over the rag cloth

The information on this page applies to the following models: GC3929/64 , GC2145/29 , GC2678/39 , GC2676/29 , GC2999/84 , GC3920/24 , GC2996/20 , GC8712/00 , GC9324/20 , GC4527/01 , GC2984/20 , GC3811/80 , GC3820/20 , GC9642/60 , GC6631/30 , GC2040/70 , GC2046/20 , GC1490/02 , HI518/02 , HI570/02 . more less

Not what you are looking for?

Did we answer your question?

If not, contact us.